Chapter 36 Cloud CNM
ZyWALL ATP Series User’s Guide
684
Figure 451 Configuration > Cloud CNM > SecuManager
The following table describes the labels in this screen.
Table 297 Configuration > Cloud CNM > SecuManager
LABEL DESCRIPTION
Show Advanced
Settings / Hide
Advanced Settings
Click this button to display a greater or lesser number of configuration fields.
Enable Select this to allow management of the Zyxel Device by Cloud CNM SecuManager.
Auto Select this if your Cloud CNM SecuManager server can access myZyxel to automatically
get the VM server URL from myZyxel. You also need CNM ID from the Cloud CNM
SecuManager license.
CNM URL myZyxel associates the CNM ID with the CNM URL which identifies the server on which
Cloud CNM SecuManager is installed. Therefore you don’t need to enter the CNM URL
when you select Auto.
Custom Select this if your Cloud CNM SecuManager server cannot access myZyxel.
CNM URL Select this if your VM server or Zyxel Device are in a private network, or if the VM server is
behind a NAT router. You then need to manually enter the VM server URL into the Zyxel
Device. Enter the IPv4 IP address of the Cloud CNM SecuManager server followed by the
port number (default 7547 for HTTPS or 7549 for HTPP) followed by the CNM ID from the
license in CNM URL. For example, if you installed Cloud CNM SecuManager on a server
with IP address 1.1.1.1 and CNM ID V6ABQNTPYGD, then type 1.1.1.1:7547/
V6ABQNTPYG or 1.1.1.1:7549/V6ABQNTPYG as the CNM URL.
Transfer Protocol Choose the CNM URL protocol: HTTP or HTTPS. If you enter 1.1.1.1:7547 as the CNM URL,
you must choose HTTPS as the Transfer Protocol, and then the whole CNM URL is https://
1.1.1.1:7547. If you enter 1.1.1.1:7549 as the CNM URL, you must choose HTTP as the
Transfer Protocol, and then the whole CNM URL is http://1.1.1.1:7549.
Periodic Inform Enable this to have the Zyxel Device inform the Cloud CNM SecuManager server of its
presence at regular intervals.
To Next Page
Loading...
