ZyXEL Communications NBG5615 - Page 125

Chapter 12 Wireless LAN
NBG5615 User’s Guide
125
Figure 71 Network > Wireless LAN 2.4G/5G > WPS
The following table describes the labels in this screen.
Table 47 Network > Wireless LAN 2.4G/5G > WPS
LABEL DESCRIPTION
WPS Setup
WPS Select Enable to turn on the WPS feature. Otherwise, select Disable.
PIN Code Select Enable and click Apply to allow the PIN Configuration method. If you select
Disable, you cannot create a new PIN number.
PIN Number This is the WPS PIN (Personal Identification Number) of the NBG5615. Enter this PIN in
the configuration utility of the device you want to connect to the NBG5615 using WPS.
The PIN is not necessary when you use WPS push-button method.
Click Generate to generate a new PIN number.
WPS Status
Status This displays Configured when the NBG5615 has connected to a wireless network using
WPS or when WPS Enable is selected and wireless or wireless security settings have
been changed. The current wireless and wireless security settings also appear in the
screen.
This displays Unconfigured if WPS is disabled and there are no wireless or wireless
security changes on the NBG5615 or you click Release Configuration to remove the
configured wireless and wireless security settings.
Release
Configuration
This button is only available when the WPS status displays Configured.
Click this button to remove all configured wireless and wireless security settings for WPS
connections on the NBG5615.
802.11 Mode This is the 802.11 mode used. Only compliant WLAN devices can associate with the
NBG5615.
SSID This is the name of the wireless network (the NBG5615’s first SSID).
Security This is the type of wireless security employed by the network.