NBG5615 User’s Guide 15
CHAPTER 1
Introduction
1.1 Overview
This chapter introduces the main features and applications of the NBG5615.
The NBG5615 extends the range of your existing wired network without additional wiring, providing
easy network access to mobile users. You can set up a wireless network with other IEEE 802.11a/b/
g/n compatible devices. The NBG5615 is able to function both 2.4GHz and 5GHz networks at the
same time.
A range of services such as a firewall and content filtering are also available for secure Internet
computing.
There are two USB 2.0 ports on the side panel of your NBG5615. You can connect USB (version 2.0
or lower) memory sticks, USB hard drives, or USB devices for file sharing. The NBG5615
automatically detects the USB devices.
Note: For the USB function, it is strongly recommended to use version 2.0 or lower USB
storage devices (such as memory sticks, USB hard drives) and/or USB devices
(such as USB printers). Other USB products are not guaranteed to function
properly with the NBG5615.
Note: Be sure to install the ZyXEL NetUSB
TM
Share Center Utility (for NetUSB
functionality) from the included disc, or download the latest version from the
zyxel.com website.
1.2 Applications
Your can have the following networks using the NBG5615:
• Wired. You can connect network devices via the Ethernet ports of the NBG5615 so that they can
communicate with each other and access the Internet.
• Wireless. Wireless clients can connect to the NBG5615 to access network resources. You can
use WPS (Wi-Fi Protected Setup) to create an instant network connection with another WPS-
compatible device.
• WAN. Connect to a broadband modem/router for Internet access.
• NetUSB. The NBG5615 allows you to connect a USB device (such as printer, or scanner) directly
to the USB port and then share that device over the network using the NetUSB utility.
To Next Page
Loading...
