ZyXEL Communications NBG5615 - Rule Configuration: Application Rule Configuration

Chapter 20 Bandwidth Management
NBG5615 User’s Guide
168
The following table describes the labels in this screen.
20.5.1 Rule Configuration: Application Rule Configuration
If you want to edit a bandwidth management rule for a pre-defined service or application, click the
Edit icon in the Application List table of the Advanced screen. The following screen displays.
Table 67 Management > Bandwidth Management > Advanced
LABEL DESCRIPTION
Management Bandwidth
Upstream
Bandwidth
Select the total amount of bandwidth from a drop-down list box that you want to dedicate
to uplink traffic. Otherwise, select User Defined and manually specify the amount of
bandwidth in kilobits per second.
This is traffic from LAN/WLAN to WAN.
Downstream
Bandwidth
Select the total amount of bandwidth from a drop-down list box that you want to dedicate
to uplink traffic. Otherwise, select User Defined and manually specify the amount of
bandwidth in kilobits per second.
This is traffic from WAN to LAN/WLAN.
Application List Use this table to allocate specific amounts of bandwidth based on a pre-defined service.
# This is the number of an individual bandwidth management rule.
Priority Select a priority from the drop down list box. Choose High, Mid or Low.
• High - Select this for voice traffic or video that is especially sensitive to jitter (jitter is
the variations in delay).
• Mid - Select this for "excellent effort" or better than best effort and would include
important business traffic that can tolerate some delay.
• Low - Select this for non-critical "background" traffic such as bulk transfers that are
allowed but that should not affect other applications and users.
Category This is the category where a service belongs.
Service This is the name of the service.
Select the check box to have the NBG5615 apply this bandwidth management rule.
Click the Edit icon to open the Rule Configuration screen where you can modify the
rule.
User-defined
Service
Use this table to allocate specific amounts of bandwidth to specific applications or services
you specify.
# This is the number of an individual bandwidth management rule.
Enable Select this check box to have the NBG5615 apply this bandwidth management rule.
Direction Select To LAN&WLAN to apply bandwidth management to traffic from WAN to LAN and
WLAN.
Select To WAN to apply bandwidth management to traffic from LAN/WLAN to WAN.
Service Name Enter a descriptive name for the bandwidth management rule.
Category This is the category where a service belongs.
Modify Click the Edit icon to open the Rule Configuration screen. Modify an existing rule or
create a new rule in the Rule Configuration screen. See Section 20.5.2 on page 169 for
more information.
Click the Remove icon to delete a rule.
Apply Click Apply to save your customized settings.
Cancel Click Cancel to begin configuring this screen afresh.