NBG5615 User’s Guide 57
CHAPTER 7
Router Mode
7.1 Overview
The NBG5615 is set to router mode by default. Routers are used to connect the local network to
another network (for example, the Internet). In the figure below, the NBG5615 connects the local
network (LAN1 ~ LAN4) to the Internet.
Figure 35 NBG5615 Network
Note: The Status screen is shown after changing to the Expert Mode of the Web
Configurator. It varies depending on the device mode of your NBG5615.
7.2 Router Mode Status Screen
Click to open the status screen.
To Next Page
Loading...
