ZyXEL Communications NBG5615 - Automatically Connecting to a USB Printer

Chapter 9 Tutorials
NBG5615 User’s Guide
84
9.5 Automatically Connecting to a USB Printer
Your computer can connect to a shared USB printer by using the ZyXEL NetUSB Share Center
Utility. This tutorial shows you how to set your computer to automatically connect to a shared USB
printer over your NBG5615 network each time you log into your computer.
1 Install the ZyXEL NetUSB Share Center Utility to your computer which should be connected to the
NBG5615’s network. See Chapter 2 on page 22 for details on the installation.
2 Connect a USB printer to one of the USB ports of the NBG5615.
3 Open the ZyXEL NetUSB Sharing Center Utility on your computer. The name of the USB printer
automatically shows in the Utility screen.