Chapter 3 Connection Wizard
NBG5615 User’s Guide
35
Figure 15 Wireless Security: No Security
The following table describes the labels in this screen.
3.5.2 Wireless Security: WPA2-PSK
Choose WPA2-PSK security in the Wireless Security screen to set up a password for your wireless
network.
Table 11 Wireless Security: No Security
LABEL DESCRIPTION
Wireless Radio Choose whether you want to apply the wireless security to 2.4G Hz or 5G Hz wireless
radio.
Wireless
Network Name
(SSID)
Enter a descriptive name (up to 32 printable 7-bit ASCII characters) for the wireless LAN.
If you change this field on the NBG5615, make sure all wireless stations use the same SSID
in order to access the network.
Security Mode Select a security level from the drop-down list box.
Choose No Security to have no wireless LAN security configured. If you do not enable any
wireless security on your NBG5615, your network is accessible to any wireless networking
device that is within range.
Exit Click this to close the wizard screen without saving.
Back Click this to return to the previous screen.
Next Click this to continue.
To Next Page
Loading...
