Chapter 2 ZyXEL NetUSB Share Center Utility
NBG5615 User’s Guide
22
3 To open the ZyXEL NetUSB
Share Center Utility, double-click its system tray icon.
2.2 The ZyXEL NetUSB Share Center Utility
This section describes the ZyXEL NetUSB
Share Center Utility main window.
Figure 3 ZyXEL NetUSB
Share Center Utility Main Window
The following table describes the icons in this window.
Table 3 ZyXEL NetUSB Share Center Utility Main Window Icons
ICON DESCRIPTION
Configure Server
Click to open the NBG5615’s built-in Web Configurator, which you can use to set up the
NBG5615 (see Chapter 4 on page 39 for details).
Auto-Connect Printer
You can set the selected printer to ‘auto-connect’ after you have connected it to your
computer during inital connection. If the printer is auto-connected to your computer,
they will always be connected over the network. You do not need to configure it
manually each time.
Note: If the computer is connecting to the shared USB printer for the first time, you need
to click Connect and setup the printer before you can use the Auto-Connect
Printer function. See Chapter 9 on page 84 for more details.
Note: You first must install the appropriate drivers for the printer that you intend to use.
To Next Page
Loading...
