Chapter 6 Easy Mode
NBG5615 User’s Guide
47
Figure 24 Control Panel
The following table describes the labels in this screen.
6.5 Network Map
Note: The Network MAP is viewable by Windows XP (need to install patch), Windows
Vista and Windows 7 users only. For Windows XP (Service Pack 2) users, you can
see the network devices connected to the NBG5615 by downloading the LLTD (Link
Layer Topology Discovery) patch from the Microsoft Website.
Note: Don’t worry if the Network Map does not display in your web browser. This feature
may not be supported by your system. You can still configure the Control Panel
(Section 6.6 on page 48) in the Easy Mode and the NBG5615 features that you
want to use in the Expert Mode.
When you log into the Web Configurator, the Network Map is shown as follows.
Figure 25 Network Map
Table 17 Control Panel
ITEM DESCRIPTION
Home Click this to go to the Login page.
Expert Mode Click this to change to
Expert Mode and customize features of the NBG5615.
Logout Click this to end the Web Configurator session.
To Next Page
Loading...
