Chapter 17 Static Route
NBG5615 User’s Guide
153
The following table describes the labels in this screen.
Table 62 Network > Static Route: Add/Edit
LABEL DESCRIPTION
Static Route Select to enable or disable this rule.
Route Name Type a name to identify this rule. You can use up to printable English keyboard
characters, including spaces.
Destination IP
Address
This parameter specifies the IP network address of the final destination. Routing is
always based on network number. If you need to specify a route to a single host, use a
subnet mask of 255.255.255.255 in the subnet mask field to force the network number to
be identical to the host ID.
IP Subnet Mask Enter the IP subnet mask here.
Gateway IP
Address
Enter the IP address of the next-hop gateway. The gateway is a router or switch on the
same segment as your NBG5615's interface(s). The gateway helps forward packets to
their destinations.
Back Click Back to return to the previous screen without saving.
Apply Click Apply to save your changes back to the NBG5615.
Cancel Click Cancel to set every field in this screen to its last-saved value.
To Next Page
Loading...
