Chapter 4 Introducing the Web Configurator
NBG5615 User’s Guide
41
The following table describes the labels in this screen.
Note: The management session automatically times out when the time period set in the
Administrator Inactivity Timer field expires (default five minutes; go to Chapter
24 on page 193 to change this). Simply log back into the NBG5615 if this happens.
4.2.2.1 Weather Edit
You can change the temperature unit and select the location for which you want to know the
weather.
Click the icon to change the Weather display.
Figure 20 Change Weather
The following table describes the labels in this screen.
4.2.2.2 Time/Date Edit
One timezone can cover more than one country. You can choose a particular country in which the
NBG5615 is located and have the NBG5615 display and use the current time and date for its logs.
Click the icon to change the time and date display.
Figure 21 Change Password Screen
Table 14 Change Password Screen
LABEL DESCRIPTION
New Password Type a new password.
Retype to Confirm Retype the password for confirmation.
Apply Click Apply to save your changes back to the NBG5615.
Ignore Click Ignore if you do not want to change the password this time.
Table 15 Change Weather
LABEL DESCRIPTION
Change Unit Choose which temperature unit you want the NBG5615 to display.
Change Location Select the location for which you want to know the weather. If the city you want is not
listed, choose one that is closest to it.
Finish Click this to apply the settings and refresh the date and time display.
To Next Page
Loading...
