ZyXEL Communications NBG5615 - Page 62

Chapter 7 Router Mode
NBG5615 User’s Guide
62
Wireless LAN
2.4G/5G
General Use this screen to enable the wireless LAN and configure wireless LAN and
wireless security settings.
More AP Use this screen to configure multiple BSSs on the NBG5615.
MAC Filter Use the MAC filter screen to configure the NBG5615 to block access to
devices or block the devices from accessing the NBG5615.
Advanced This screen allows you to configure advanced wireless settings.
QoS Use this screen to configure Wi-Fi Multimedia Quality of Service (WMM
QoS). WMM QoS allows you to prioritize wireless traffic according to the
delivery requirements of individual services.
WPS Use this screen to configure WPS.
WPS Station Use this screen to add a wireless station using WPS.
Scheduling Use this screen to schedule the times the Wireless LAN is enabled.
LAN IP Use this screen to configure LAN IP address and subnet mask.
IP Alias Use this screen to have the NBG5615 apply IP alias to create LAN subnets.
DHCP Server General Use this screen to enable the NBG5615’s DHCP server.
Advanced Use this screen to assign IP addresses to specific individual computers
based on their MAC addresses and to have DNS servers assigned by the
DHCP server.
Client List Use this screen to view information related to your DHCP status.
NAT General Use this screen to enable NAT.
Port
Forwarding
Use this screen to configure servers behind the NBG5615 and forward
incoming service requests to the server(s) on your local network.
Port Trigger Use this screen to change your NBG5615’s port triggering settings.
Dynamic
DNS
Dynamic DNS Use this screen to set up dynamic DNS.
Static Route Static Route Use this screen to configure IP static routes.
Security
Firewall General Use this screen to activate/deactivate the firewall.
Services This screen shows a summary of the firewall rules, and allows you to edit/
add a firewall rule.
Content
Filter
Content Filter Use this screen to block certain web features and sites containing certain
keywords in the URL.
Management
Bandwidth
Management
General Use this screen to enable bandwidth management.
Advanced Use this screen to set the upstream bandwidth and edit a bandwidth
management rule.
Remote
Management
WWW Use this screen to configure through which interface(s) and from which IP
address(es) users can use HTTP to manage the NBG5615.
Telnet Use this screen to configure through which interface(s) and from which IP
address(es) users can use Telnet to manage the NBG5615.
Wake On LAN Use this screen to enable Wake on LAN to remotely turn on a device on the
local network.
UPnP General Use this screen to enable UPnP on the NBG5615.
Table 26 Navigation Panel: Router Mode (continued)
LINK TAB FUNCTION