ZyXEL Communications NBG5615 - Page 68

Chapter 8 Access Point Mode
NBG5615 User’s Guide
68
The following table describes the labels shown in the Status screen.
Table 27 Status Screen: Access Point Mode
LABEL DESCRIPTION
Device Information
Host Name This is the System Name you enter in the Maintenance > General screen. It is for
identification purposes.
Model Number This is the model name of your device.
Firmware Version This is the firmware version and the date created.
Sys OP Mode This is the device mode (Section 5.1.2 on page 43) to which the NBG5615 is set - AP Mode.
LAN Information
MAC Address This shows the LAN Ethernet adapter MAC Address of your device.
IP Address This shows the LAN port’s IP address.
IP Subnet Mask This shows the LAN port’s subnet mask.
DHCP This shows the LAN port’s DHCP role - Client or None.
WLAN 2.4G Information
WLAN OP Mode This is the device mode (Section 5.1.2 on page 43) to which the NBG5615’s wireless LAN is
set - Access Point Mode.
MAC Address This shows the 2.4GHz wireless adapter MAC Address of your device.
SSID This shows a descriptive name used to identify the NBG5615 in the 2.4GHz wireless LAN.
Channel This shows the channel number which you select manually.
Security This shows the level of wireless security the NBG5615 is using.
WLAN 5G Information
MAC Address This shows the 5GHz wireless adapter MAC Address of your device.
SSID This shows a descriptive name used to identify the NBG5615 in the 5GHz wireless LAN.
Channel This shows the channel number which you select manually.
Security This shows the level of wireless security the NBG5615 is using.
Summary
Packet Statistics Click Details... to go to the Monitor > Packet Statistics screen (Section 10.5 on page
91). Use this screen to view port status and packet specific statistics.
WLAN 2.4G Station
Status
Click Details... to go to the Monitor > WLAN 2.4G Station Status screen (Section 10.6
on page 92). Use this screen to view the wireless stations that are currently associated to
the NBG5615’s 2.4GHz wireless LAN.
WLAN 5G Station Status Click Details... to go to the Monitor > WLAN 5G Station Status screen (Section 10.6 on
page 92). Use this screen to view the wireless stations that are currently associated to the
NBG5615’s 5GHz wireless LAN.
System Status
Item This column shows the type of data the NBG5615 is recording.
Data This column shows the actual data recorded by the NBG5615.
System Up Time This is the total time the NBG5615 has been on.
Current Date/Time This field displays your NBG5615’s present date and time.
System Resource
- CPU Usage This displays what percentage of the NBG5615’s processing ability is currently used. When
this percentage is close to 100%, the NBG5615 is running at full load, and the throughput is
not going to improve anymore. If you want some applications to have more throughput, you
should turn off other applications (for example, using bandwidth management.)
- Memory Usage This shows what percentage of the heap memory the NBG5615 is using.