Chapter 4 Tutorials
NWA3000-N Series User’s Guide
56
4 The Add SSI D Profile window opens.
4a Profile Name: Enter ‘staff’.
4b SSI D: Enter ‘staff’. This is the wireless network name that appears when wireless clients are
looking for networks to join.
4c Security Profile: Select w pa2 from the list. This is the security profile created in step
2.
4d QoS: Select W MM.
4e VLAN I D: Enter ‘101’.
4f Turn on intra-BSS traffic blocking.
4g Click OK to save these settings.
5 Repeat steps
3 and 4 to create the guest SSID profile with the same settings except ‘guest’ as the
profile name and SSID and 102 for the VLAN ID.
6 Open the Configuration > Object> AP Profile > Radio screen and then double-click the default
entry.
To Next Page
Loading...
