WAH7608 User’s Guide
112
CHAPTER 14
System
14.1 Overview
Use the system screens to configure general WAH7608 settings.
14.1.1 What You Can Do in this Chapter
• Use the About screen to view basic information about the WAH7608 and restart the WAH7608 (Section
14.2 on page 112).
• Use the Firmware Upgrade screen to upload new firmware to your WAH7608 (Section 14.3 on page
113).
• Use the Password screen to change the WAH7608’s system password (Section 14.4 on page 114).
• Use the Password > Session Timeout screen to configure the web configurator’s inactive time (Section
14.5 on page 114).
• Use the Language screen to change the language of the web configurator (Section 14.6 on page
115).
• Use the Date and Time screen to change the WAH7608’s time and date and configure daylight
saving time (Section 14.7 on page 115).
• Use the Power Saving screen to enable the power saving settings in the WAH7608 (Section 14.8 on
page 117).
• Use the Power Saving > OLED Display screen to configure the OLED display screen time before it turns
off (Section 14.9 on page 118).
• Use the Reset screen to reset your device settings back to the factory default (Section 14.10 on page
118).
• Use the Reboot screen to restart your WAH7608 (Section 14.11 on page 118).
14.2 The About Screen
Use this screen to view basic information about the WAH7608. To access this screen, click System >
About.
To Next Page
Loading...
