Chapter 7 Monitor
WAH7608 User’s Guide
57
7.4 ARP Table
Address Resolution Protocol (ARP) is a protocol for mapping an Internet Protocol address (IP address) to
a physical machine address, also known as a Media Access Control or MAC address, on the local area
network.
Use the ARP table to view IP-to-MAC address mapping(s).
Figure 20 Monitor > ARP Table
The following table describes the labels in this screen.
7.5 Packet Statistics
Click Monitor > Packet Statistics or the Packet Statistics (Details...) hyperlink in the Status screen. Read-
only information here includes port status and packet specific statistics.
Table 8 System Monitor > ARP Table
LABEL DESCRIPTION
# This is the index number of the entry.
IP Address This is the learned IPv4 or IPv6 IP address of a device connected to a port.
MAC Address This is the MAC address of the device with the listed IP address.
Device This is the type of interface used by the device.
• br0 indicates a LAN interface where 0 represents LAN1 or LAN2.
• WAN indicates a connection via mobile network (4G, 3G or 2G).
• WLAN indicates a connection via WiFi network.
• RNDIS indicates a connection via USB.
State This column shows the current status of the connection.
Refresh Click Refresh to update this screen.
To Next Page
Loading...
