WAH7608 User’s Guide
89
CHAPTER 12
WiFi
12.1 Overview
This chapter discusses how to configure the wireless network settings in your WAH7608.
The following figure provides an example of a wireless network.
Figure 51 Example of a Wireless Network
The wireless network is the part in the blue circle. In this wireless network, devices A and B are called
wireless clients. The wireless clients use the access point (AP) to interact with other devices (such as the
printer) or with the Internet. Your WAH7608 is the AP.
12.1.1 What You Can Do in this Chapter
• Use the Basic screen to enable the wireless LAN, enter the SSID and select the wireless security mode
(Section 12.2 on page 90).
• Use the WPS screen to activate WPS via PBC or PIN configuration (Section 12.3 on page 92).
• Use the MAC Filter screen to deny wireless clients based on their MAC addresses from connecting to
the WAH7608 (Section 12.4 on page 93).
To Next Page
Loading...
