ZyXEL Communications WAH7608 - Monitor; Chapter 7 Monitor; Overview; What You Can Do in this Chapter

WAH7608 User’s Guide
55
CHAPTER 7
Monitor
7.1 Overview
This chapter discusses read-only information related to the device state of the WAH7608.
To access the Monitor screens, click after login.
You can also click the links in the Summary table of the Status screen to view the packets sent/received
as well as the status of your WAN connection.
7.1.1 What You Can Do in this Chapter
• Use the Log screen to see the logs for the activity on the WAH7608 (Section 7.2 on page 55).
• Use the DHCP Table screen to view information related to your DHCP status (Section 7.3 on page 56).
• Use the ARP Table screen to view the mappings of IP and MAC addresses. (Section 7.4 on page 57).
• Use the Packet Statistics screen to view port status, packet specific statistics, the “system up time” and
so on (Section 7.5 on page 57).
• Use the LTE Modem Status screen to view the detailed information about the LTE module, cellular
interface, and SIM card. You can also check the LTE connection status (Section 7.6 on page 58).
7.2 The Log Screen
The Web Configurator allows you to look at all of the WAH7608’s logs in one location.
Use the Log screen to see the logged messages for the WAH7608. The log wraps around and deletes the
old entries after it fills. Click Refresh to renew the log screen. Click Clear Log to delete all the logs.
Figure 18 Log