ZyXEL Communications WAH7608 - 8.8 The Data Usage;Statistics Screen

Chapter 8 Network
WAH7608 User’s Guide
69
8.8 The Data Usage/Statistics Screen
This screen allows you to configure limiting the amount of the package data.Click Configuration >
Network > Data Usage > Data Usage/Statistics. The screen appears as shown next.
Figure 32 Configuration > Network > Data Usage > Data Usage/Statistics
The following table describes the labels in this screen.
SSID This shows the descriptive name of the wireless network detected by the WAH7608.
Tap on an SSID and a pop-up window appears. Enter the Pre-Shared Key or
password and click Connect so the WAH7608 connects to the wireless network.
Figure 31 Pre-shared Key
Signal Strength (dBm) This shows the strength of the wireless network’s radio signal measured in dBm.
Channel This shows the channel the wireless network uses.
Encryption Type This shows the data encryption method the WAH7608 uses for the wireless
connection.
Total Num This shows the total number of wireless networks your WAH7608 detects.
Scan Click Scan to refresh the list of available wireless networks.
Table 14 Configuration > Network > WiFi Client
LABEL DESCRIPTION
Table 15 Configuration > Network > Data Usage > Data Usage/Statistics
LABEL DESCRIPTION
Enable Data Limit Select the check box to activate a limiting amount of package data.
Total Allowance Specify the limiting the amount of the package data (in GB) in this field.
Notify me when data usage
reaches
Specify the percentage of data usage the WAH7608 has to reach to send a
notification.
Reset Date Select the day of the month on which the WAH7608 restarts calculating the amount
of package data per month.