Chapter 8 Network
WAH7608 User’s Guide
68
Figure 30 Configuration > Network > WiFi Client
The following table describes the labels in this screen.
Table 14 Configuration > Network > WiFi Client
LABEL DESCRIPTION
WiFi Client
Enable Select the check box and click Apply to enable client mode in the WAH7608.
Connected WLAN
This shows the settings of the current AP to which your WAH7608 is connected.
WiFi Client Scan Result
This shows a list of the APs the WAH7608 currently detects in the area.
BSSID This shows the MAC address of the wireless network.
To Next Page
Loading...
