Chapter 15 Troubleshooting
WAH7608 User’s Guide
123
4 Make sure you are using the correct WiFi network name and password to connect to your WAH7608.
Check your WiFi network settings by tapping on the network name on the Home screen page of LTE Ally.
5 If you changed your network WiFi Name and/or key you will be automatically disconnected from the
WAH7608, try reconnecting to the network wirelessly with the new network WiFi Name and/or key.
One of my clients cannot access the WAH7608.
1 Make sure the WiFi LAN is enabled on the WAH7608. You can enable or disable the WAH7608’s WiFi
network by pushing on the WPS on the WAH7608. See Section 1.7 on page 12.
2 Make sure the WiFi adapter (installed on your computer) is IEEE 802.11 compatible and supports the
same WiFi standard as the WAH7608’s active radio.
3 Make sure your client’s device (with a WiFi adapter installed) is within the transmission range of the
WAH7608.
4 Make sure your client is using the correct WiFi network name and password to connect to your
WAH7608. Check your WiFi network settings by tapping on the network name on the Home screen page
of LTE Ally.
15.6 Getting More Troubleshooting Help
Search for support information for your model at www.zyxel.com for more troubleshooting suggestions.
To Next Page
Loading...
