WAH7608 User’s Guide
61
CHAPTER 8
Network
8.1 Overview
This chapter discusses the WAH7608’s WAN screens. Use these screens to configure your WAH7608 for
Internet access.
A WAN (Wide Area Network) connection is an outside connection to another network or the Internet. It
connects your private networks such as a LAN (Local Area Network) and other networks, so that a
device in one location can communicate with devices in other locations.
3G and 4G standards for the sending and receiving of voice, video, and data in a mobile environment.
You can insert a 4G SIM card and set the WAH7608 to use this 3G/4G connection as your WAN.
Figure 23 LAN/Wireless LAN and Wireless WAN
8.1.1 What You Can Do in this Chapter
• Use the Connection screen to configure the WAN settings on the WAH7608 for Internet access
(Section 8.2 on page 63).
• Use the APN Setting screen to configure user-defined connection profiles (Section 8.3 on page 64).
• Use the 4G/3G/2G Modem screen to select the type of network to which you want the WAH7608 to
connect (Section 8.4 on page 65).
• Use the PIN screen to enable or disable PIN code authentication (Section 8.5 on page 66).
• Use the PLMN screen to display available Public Land Mobile Networks and select a preferred network
for roaming (Section 8.6 on page 66).
• Use the WiFi Client screen to change the WAH7608 to client mode (Section 8.7 on page 67).
• Use the Data Usage/Statistics screen to specify limiting the amount of the package data and view
the WAH7608’s traffic statistics (Section 8.8 on page 69).
• Use the Data Usage > Reset Statistics screen to reset all traffic statistics (Section 8.9 on page 70).
To Next Page
Loading...
