Chapter 8 Basic Setting
XS1930 Series User’s Guide
100
8.8.2 PoE Setup
Use this screen to set the PoE power management mode, priority levels, power-up mode and the
maximum amount of power for the connected PDs.
Click the PoE Setup link in the Basic Setting > PoE Status screen. The following screen opens.
Figure 72 Basic Setting > PoE Setup
Port This field displays the index number of the port. Click a port number to change the schedule
settings.
Time Range
Profiles
This field displays the name of the schedule which is applied to the port.
PoE is enabled at the specified time or date.
Select an entry’s check box to select a specific entry. Otherwise, select the check box in the
table heading row to select all entries.
Delete Check the rules that you want to remove and then click the Delete button.
Cancel Click Cancel to clear the selected check boxes.
Table 34 Basic Setting > PoE Setup > PoE Time Range Setup (continued)
LABEL DESCRIPTION
To Next Page
Loading...
