Chapter 18 Port Authentication
XS1930 Series User’s Guide
171
Figure 126 MAC Authentication Process
18.2 Port Authentication Configuration
To enable port authentication, first activate the port authentication methods (both on the Switch and
the ports), then configure the RADIUS server settings in the AAA > RADIUS Server Setup screen.
Click Advanced Application > Port Authentication in the navigation panel to display the screen as
shown. Select a port authentication method’s link in the screen that appears.
Figure 127 Advanced Application > Port Authentication
18.3 Activate IEEE 802.1x Security
Use this screen to activate IEEE 802.1x security. In the Port Authentication screen click 802.1x to display
the configuration screen as shown.
To Next Page
Loading...
