XS1930 Series User’s Guide
267
32.9 LLDP-MED Location
Click Advanced Application > LLDP > LLDP-MED Location (Click Here) to display the screen as shown
next.
Figure 190 Advanced Application > LLDP > LLDP-MED Location
The following table describes the labels in this screen.
Delete Check the rules that you want to remove, then click the Delete button.
Cancel Click Cancel to clear the selected check boxes.
Table 133 Advanced Application > LLDP > LLDP-MED Network Policy (continued)
LABEL DESCRIPTION
Table 134 Advanced Application > LLDP > LLDP-MED Location
LABEL DESCRIPTION
Port Enter the port number you want to set up the location within the LLDP-MED network.
Location
Coordinates
The LLDP-MED uses geographical coordinates and Civic Address to set the location
information of the remote device. Geographical based coordinates includes latitude,
longitude, altitude and datum. Civic Address includes Country, State, County, City, Street
and other related information.
Latitude Enter the latitude information. The value should be from 0º to 90º. The negative value
represents the South.
•north
•south
To Next Page
Loading...
