XS1930 Series User’s Guide
294
CHAPTER 37
Maintenance
37.1 Overview
This chapter explains how to configure the screens that let you maintain the firmware and configuration
files.
37.1.1 What You Can Do
• Use the Maintenance screen (Section 37.2 on page 294) to manage firmware and your configuration
files.
• Use the Firmware Upgrade screen (Section 37.3 on page 298) to upload the latest firmware.
• Use the Restore Configuration screen (Section 37.4 on page 299) to upload a stored device
configuration file.
• Use the Backup Configuration screen (Section 37.5 on page 300) to save your configurations for later
use.
• Use the Erase Running-Configuration screen (Section 37.2.1 on page 296) to reset the configuration to
the Zyxel default configuration settings.
• Use the Save Configuration screen (Section 37.2.2 on page 296) to save the current configuration
settings to a specific configuration file on the Switch.
• Use the Reboot System screen (Section 37.2.3 on page 296) to restart the Switch without physically
turning the power off and load a specific configuration file.
• Use the Tech-Support screen (Section 37.6 on page 300) to create reports for customer support if
there are problems with the Switch.
• Use the Certificates screen (Section 37.7 on page 302) to see the Certificate screen and import the
Switch's CA-signed certificates.
37.2 Maintenance Settings
Use this screen to manage firmware and your configuration files. Click Management > Maintenance in
the navigation panel to open the following screen.
To Next Page
Loading...
