ZyXEL Communications XS1930-12F - LLDP Remote Port Status Detail

Chapter 32 Link Layer Discovery Protocol (LLDP)
XS1930 Series User’s Guide
256
32.5.1 LLDP Remote Port Status Detail
This screen displays detailed LLDP status of the remote device connected to the Switch. Click Advanced
Application > LLDP > LLDP Remote Status (Click Here) and then click an index number, for example 1, in
the Index column in the LLDP Remote Status screen to display the screen as shown next.
Figure 182 Advanced Application > LLDP > LLDP Remote Status > LLDP Remote Port Status Detail (Basic
TLV)
The following table describes the labels in Basic TLV part of the screen.
Table 126 Advanced Application > LLDP > LLDP Remote Status > LLDP Remote Port Status Detail (Basic
TLV)
LABEL DESCRIPTION
Local Port This displays the number of the Switch’s port to which the remote device is connected.
Basic TLV
Chassis ID TLV • Chassis ID Subtype – this displays how the chassis of the remote device is identified.
• Chassis ID – this displays the chassis ID of the remote device. The chassis ID is identified by
the chassis ID subtype.
Port ID TLV • Port ID Subtype – this displays how the port of the remote device is identified.
• Port ID – this displays the port ID of the remote device. The port ID is identified by the port
ID subtype.
Time To Live TLV This displays the time-to-live (TTL) multiplier of LLDP frames. The device information on the
neighboring devices ages out and is discarded when its corresponding TTL expires. The TTL
value is to multiply the TTL multiplier by the LLDP frames transmitting interval.
Port Description
TLV
This displays the remote port description.