Chapter 8 Basic Setting
XS1930 Series User’s Guide
104
8.10 IPv6
Use this screen to view the IPv6 interface status and configure the Switch’s management IPv6 addresses.
8.10.1 IPv6 Status
Click Basic Setting > IPv6 in the navigation panel to display the IPv6 status screen as shown next.
Figure 74 Basic Setting > IPv6
The following table describes the labels in this screen.
8.10.2 IPv6 Interface Status
Use this screen to view a specific IPv6 interface status and detailed information. Click an interface index
number in the Basic Setting > IPv6 screen. The following screen opens.
Interface This field displays the interface’s descriptive name which is generated automatically by the
Switch. The name is from a combination of the interface type and ID number.
Select an entry’s check box to select a specific entry. Otherwise, select the check box in the
table heading row to select all entries.
Delete Click Delete to remove the selected entry from the summary table.
Cancel Click Cancel to clear the check boxes.
Table 36 Basic Setting > Interface Setup (continued)
LABEL DESCRIPTION
Table 37 Basic Setting > IPv6
LABEL DESCRIPTION
IPv6 Status
Domain Name
Server
This field displays the IP address of the DNS server.
Source This field displays whether the DNS server address is configured manually (Static) or obtained
automatically using DHCPv6.
IPv6 Table
Index This field displays the index number of an IPv6 interface. Click on an index number to view more
interface details.
Interface This is the name of the IPv6 interface you created.
Active This field displays whether the IPv6 interface is activated or not.
To Next Page
Loading...
