Chapter 18 Port Authentication
XS1930 Series User’s Guide
175
such as the Internet. The access granted to the Guest VLAN depends on how the network administrator
configures switches or routers with the guest network feature.
Figure 130 Guest VLAN Example
Use this screen to enable and assign a guest VLAN to a port. In the Port Authentication screen click
Guest Vlan to display the configuration screen as shown.
Figure 131 Advanced Application > Port Authentication > Guest VLAN
The following table describes the labels in this screen.
Table 79 Advanced Application > Port Authentication > Guest VLAN
LABEL DESCRIPTION
Port This field displays a port number. * means all ports.
* Settings in this row apply to all ports.
Use this row only if you want to make some settings the same for all ports. Use this row first to set
the common settings and then make adjustments on a port-by-port basis.
Changes in this row are copied to all the ports as soon as you make them.
Active Select this check box to enable the guest VLAN feature on this port.
Clients that fail authentication are placed in the guest VLAN and can receive limited services.
To Next Page
Loading...
