Chapter 4 Web Configurator
XS1930 Series User’s Guide
63
J – Click this link to go to the Neighbor screen where you can see and manage neighbor devices
learned by the Switch.
In the navigation panel, click a main link to reveal a list of sub-menu links.
The following table describes the links in the navigation panel.
Table 19 Navigation Panel Sub-links Overview
BASIC SETTING ADVANCED APPLICATION IP APPLICATION MANAGEMENT
Table 20 Navigation Panel Links
LINK DESCRIPTION
Basic Settings
System Info This link takes you to a screen that displays general system information.
General Setup This link takes you to a screen where you can configure general identification information
about the Switch.
Switch Setup This link takes you to a screen where you can set up global Switch parameters such as VLAN
type and priority queues.
IP Setup This link takes you to a screen where you can configure the IP address and subnet mask
(necessary for Switch management) and set up to 64 IP routing domains.
Port Setup This link takes you to a screen where you can configure settings for individual Switch ports.
PoE Setup For PoE models.
This link takes you to a screen where you can set priorities, PoE power-up settings and schedule
so that the Switch is able to reserve and allocate power to certain PDs.
Interface Setup This link takes you to a screen where you can configure settings for individual interface type
and ID.
IPv6 This link takes you to a screen where you can view IPv6 status and configure IPv6 settings.
To Next Page
Loading...
