Chapter 6 Configuration Basics
ZyWALL USG 20/20W User’s Guide
102
6.5.16 Bandwidth Management
Use bandwidth management (BWM) to configure a BWM rule for a specific IP
address, destination port or IP range and specify allowed amounts of bandwidth
and priorities.
Examples: Suppose you want to give a user named Bob FTP access but with a
limited download speed of 200 kbps from LAN (FTP client) to WAN (FTP server).
1 Create user account for Bob.
2 Click BWM > Add New Policy. Select the user account that you created for Bob.
3 Select from LAN zone to WAN zone (default).
4 Set BWM inbound value to 200kbps and keep the default values for all other fields.
6.5.17 ADP
Use ADP to detect and take action on traffic and protocol anomalies.
6.5.18 Content Filter
Use content filtering to block or allow access to specific categories of web site
content, individual web sites and web features (such as cookies). You can define
which user accounts (or groups) can access what content and at what times. You
must have a subscription in order to use the category-based content filtering. You
can subscribe using the menu item or one of the wizards.
Example: You can configure a policy that blocks Bill’s access to arts and
entertainment web pages during the workday. You must have already subscribed
to the content filter service.
1 Create a user account for Bill if you have not done so already (Configuration >
Object > User/Group).
MENU ITEM(S)
Configuration > BWM
PREREQUISITES
Zones
MENU ITEM(S)
Configuration > Anti-X > ADP
PREREQUISITES
Zones
MENU ITEM(S)
Configuration > Anti-X > Content Filter
PREREQUISITES
Registration, addresses (source), schedules, users, user groups
To Next Page
Loading...
