ZyXEL Communications ZYWALL USG 20 - Set up User Authentication Using the RADIUS Server

Chapter 7 Tutorials
ZyWALL USG 20/20W User’s Guide
122
2 Enter the name of the group that is used in the example in Table 18 on page 120.
In this example, it is “Finance”. Then, select User/Leo and click the right arrow to
move him to the Member list. This example only has one member in this group,
so click OK. Of course you could add more members later.
Figure 71 Configuration > Object > User/Group > Group > Add
3 Repeat this process to set up the remaining user groups.
7.5.3 Set Up User Authentication Using the RADIUS Server
This step sets up user authentication using the RADIUS server. First, configure the
settings for the RADIUS server. Then, set up the authentication method, and
configure the ZyWALL to use the authentication method. Finally, force users to log
in to the ZyWALL before it routes traffic for them.