Chapter 7 Tutorials
ZyWALL USG 20/20W User’s Guide
110
1 Click Configuration > Network > Interface > Ethernet and double-click the
lan2 interface’s entry.
The Interface Type should be internal.
Set the IP Address to 192.168.4.1 and the Subnet Mask to 255.255.255.0.
Set DHCP to DHCP Server and click OK.
Figure 57 Configuration > Network > Interface > Ethernet > Edit lan2
7.1.4 Configure Zones
Do the following to create a VPN zone.
1 Click Configuration > Network > Zone and then the Add icon.
To Next Page
Loading...
