Chapter 13 Policy and Static Routes
ZyWALL USG 20/20W User’s Guide
300
• See Section 13.4 on page 309 for more background information on policy
routing.
13.2 Policy Route Screen
Click Configuration > Network > Routing to open the Policy Route screen.
Use this screen to see the configured policy routes and turn policy routing based
bandwidth management on or off.
A policy route defines the matching criteria and the action to take when a packet
meets the criteria. The action is taken only when all the criteria are met. The
criteria can include the user name, source address and incoming interface,
destination address, schedule, IP protoco l ( I C M P, U D P, T C P, e t c . ) a n d p o r t .
The actions that can be taken include:
• Routing the packet to a different gateway, outgoing interface, VPN tunnel, or
trunk.
• Limiting the amount of bandwidth available and setting a priority for traffic.
IPPR follows the existing packet filtering facility of RAS in style and in
implementation.
Figure 185 Configuration > Network > Routing > Policy Route
To Next Page
Loading...
