EasyManua.ls Logo

ZyXEL Communications ZYWALL USG 20 - Allow HTTPS Administrator Access Only from the LAN

ZyXEL Communications ZYWALL USG 20
959 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 7 Tutorials
ZyWALL USG 20/20W User’s Guide
130
user access (logging into SSL VPN for example). See Chapter 43 on page 629 for
more on service control.
The To-ZyWALL firewall rules apply to any kind of HTTP or HTTPS connection to the
ZyWALL. They do not distinguish between administrator management access and
user access. If you configure service control to allow management or user HTTP or
HTTPS access, make sure the firewall is not configured to block that access.
7.8.1 Allow HTTPS Administrator Access Only From the LAN
This example configures service control to block administrator HTTPS access from
all zones except the LAN1.
1 Click Configuration > System > WWW.
2 In HTTPS Admin Service Control, click the Add icon.
Figure 81 Configuration > System > WWW
3 In the Zone field select LAN1 and click OK.
Figure 82 Configuration > System > WWW > Service Control Rule Edit

Table of Contents

Other manuals for ZyXEL Communications ZYWALL USG 20

Related product manuals