ZyXEL Communications ZYWALL USG 20 - Set up User Groups

Chapter 7 Tutorials
ZyWALL USG 20/20W User’s Guide
121
2 Enter the same user name that is used in the RADIUS server, and set the User
Type to ext-user because this user account is authenticated by an external
server. Click OK.
Figure 70 Configuration > Object > User/Group > User > Add
3 Repeat this process to set up the remaining user accounts.
7.5.2 Set Up User Groups
Set up the user groups and assign the users to the user groups.
1 Click Configuration > Object > User/Group > Group. Click the Add icon.