ZyXEL Communications ZYWALL USG 20 - Tutorials; Chapter 7 Tutorials; How to Configure Interfaces, Port Roles, and Zones

ZyWALL USG 20/20W User’s Guide
107
CHAPTER 7
Tutorials
Here are examples of using the Web Configurator to set up features in the
ZyWALL.
Note: The tutorials featured here require a basic understanding of connecting to
and using the Web Configurator, see Chapter 3 on page 43 for details. For field
descriptions of individual screens, see Technical Reference on page 163.
7.1 How to Configure Interfaces, Port Roles, and
Zones
This tutorial shows how to configure Ethernet interfaces, port roles, and zones for
the following example configuration (see Section 6.2.2 on page 90 for the default
configuration).
• You want to be able to apply security settings specifically for all VPN tunnels so
you create a new VPN zone.
•The wan1 interface uses a static IP address of 1.2.3.4.