Chapter 11 Interfaces
ZyWALL USG 20/20W User’s Guide
267
11.8.2 VLAN Add/Edit
This screen lets you configure IP address assignment, interface bandwidth
parameters, DHCP settings, and connectivity check for each VLAN interface. To
access this screen, click the Add icon at the top of the Add column or click an
Edit icon next to a VLAN interface in the VLAN Summary screen. The following
screen appears.
Apply Click Apply to save your changes back to the ZyWALL.
Reset Click Reset to return the screen to its last-saved settings.
Table 65 Configuration > Network > Interface > VLAN (continued)
LABEL DESCRIPTION
To Next Page
Loading...
