Chapter 43 System
ZyWALL USG 20/20W User’s Guide
677
43.13 Language Screen
Click Configuration > System > Language to open the following screen. Use
this screen to select a display language for the ZyWALL’s Web Configurator
screens.
Figure 409 Configuration > System > Language
The following table describes the labels in this screen.
Table 209 Configuration > System > Language
LABEL DESCRIPTION
Language Setting Select a display language for the ZyWALL’s Web Configurator
screens. You also need to open a new browser session to display the
screens in the new language.
Apply Click Apply to save your changes back to the ZyWALL.
Reset Click Reset to return the screen to its last-saved settings.
To Next Page
Loading...
