Chapter 7 Tutorials
ZyWALL USG 20/20W User’s Guide
125
1 Click Configuration > Object > AAA Server > RADIUS. Double-click the
radius entry. Besides configuring the RADIUS server’s address, authentication
port, and key; set the Group Membership Attribute field to the attribute that
the ZyWALL is to check to determine to which group a user belongs. This example
uses Class. This attribute’s value is called a group identifier; it determines to
which group a user belongs. In this example the values are Finance, Engineer,
Sales, and Boss.
Figure 75 Configuration > Object > AAA Server > RADIUS > Add
To Next Page
Loading...
