Chapter 23 IPSec VPN
ZyWALL USG 20/20W User’s Guide
411
Peer ID Type Select which type of identification is used to identify the remote
IPSec router during authentication. Choices are:
IP - the remote IPSec router is identified by an IP address
DNS - the remote IPSec router is identified by a domain name
E-mail - the remote IPSec router is identified by an e-mail address
Any - the ZyWALL does not check the identity of the remote IPSec
router
If the ZyWALL and remote IPSec router use certificates, there is one
more choice.
Subject Name - the remote IPSec router is identified by the subject
name in the certificate
Table 118 Configuration > VPN > IPSec VPN > VPN Gateway > Edit (continued)
LABEL DESCRIPTION
To Next Page
Loading...
