ZyXEL Communications ZYWALL USG 20 - Page 753

Appendix A Log Descriptions
ZyWALL USG 20/20W User’s Guide
753
%s %s from %s has been
logged out SSLVPN (re-
auth timeout)
The specified user was signed out by the device due to a re-
authentication timeout.
The first %s is the type of user account.
The second %s is the user’s user name.
The third %s is the name of the service the user is using
(HTTP or HTTPS).
%s %s from %s has been
logged out SSLVPN
(lease timeout)
The specified user was signed out by the device due to a
lease timeout.
The first %s is the type of user account.
The second %s is the user’s user name.
The third %s is the name of the service the user is using
(HTTP or HTTPS).
%s %s from %s has been
logged out SSLVPN
(idle timeout)
The specified user was signed out by the device due to an
idle timeout.
The first %s is the type of user account.
The second %s is the user’s user name.
The third %s is the name of the service the user is using
(HTTP or HTTPS).
Failed login attempt
to SSLVPN from %s
(login on a lockout
address)
An SSL VPN login attempt from the listed user (%s) was
blocked due to too many failed login attempts.
Failed login attempt
to SSLVPN from %s
(reach the max. number
of user)
The listed user (%s) failed to log into SSL VPN because the
maximum number of users were already logged in.
Failed login attempt
to SSLVPN from %s
(reach the max. number
of simultaneous logon)
The listed user (%s) failed to log into SSL VPN because the
maximum number of simultaneous logons was already
reached.
Failed login attempt
to SSLVPN from %s
(incorrect password or
inexistent username)
The listed user (%s) failed to log into SSL VPN because of
entering an incorrect password or a user name that does not
exist.
%s: Failed to receive
messages from uam
daemon.
Messages were not received from the UAM daemon.
Table 242 SSL VPN Logs (continued)
LOG MESSAGE DESCRIPTION