Appendix A Log Descriptions
ZyWALL USG 20/20W User’s Guide
773
Access control rule %u
of %s was modified.
An access control rule was modified successfully.
%u is the index of the access control rule.
%s is HTTP/HTTPS/SSH/SNMP/FTP/TELNET.
Access control rule %u
of %s was deleted.
An access control rule was removed successfully.
%u is the index of the access control rule.
%s is HTTP/HTTPS/SSH/SNMP/FTP/TELNET.
Access control rule %d
of %s was moved to %d.
An access control rule was moved successfully.
1st %d is the previous index .
%s is HTTP/HTTPS/SSH/SNMP/FTP/TELNET.
2nd %d is current previous index.
SNMP trap can not be
sent successfully
Cannot send a SNMP trap to a remote host due to network
error
Table 253 System Logs
LOG MESSAGE DESCRIPTION
Port %d is up!! When LINK is up, %d is the port number.
Port %d is down!! When LINK is down, %d is the port number.
%s is dead at %s A daemon (process) is gone (was killed by the operating
system).
1st %s: Daemon Name, 2nd %s: date and time
%s process count is
incorrect at %s
The count of the listed process is incorrect.
1st %s: Daemon Name, 2nd %s: date and time
%s becomes Zombie at
%s
A process is present but not functioning.
1st %s: Daemon Name, 2nd %s: date and time
When memory usage exceed threshold-max, memory usage
reaches %d%% :mem-threshold-max.
When local storage usage exceeds threshold-max, %s:
Partition name file system usage reaches %d%%: disk-
threshold-max.
When memory usage drops below threshold-min, System
Memory usage drops below the threshold of %d%%: mem-
threshold-min.
When local storage usage drops below threshold-min, %s:
partition_name file system drops below the threshold of
%d%%: disk-threshold-min.
DHCP Server executed
with cautious mode
enabled
DHCP Server executed with cautious mode enabled.
Table 252 Built-in Services Logs (continued)
LOG MESSAGE DESCRIPTION
To Next Page
Loading...
