2N C-CURE 9000 - Part 2 Introduction; 2.1 2 N Intercoms Integration Overview

Configuration & User Manual: 2N IP Intercoms and CCURE 9000
COPYRIGHT © 2022 2N Telekomunikace a.s. All rights reserved
Part 2 Introduction
This chapter introduces the 2N Intercoms Integration software that provides integration between the 2N
Intercoms and C•CURE 9000 access security management.
2.1 2N Intercoms Integration Overview
The C•CURE 9000 2N Intercoms Integration product provides integration between the 2N Intercoms and
the C•CURE 9000 Security Management System.
The C•CURE integration provides client components, server components and a Windows service. It is
based on a standard C•CURE CrossFire integration and provides the following features:
• 2N Intercoms Editor
• Journal activity
• Event triggers based on server state
The integration driver acts as an interface between 2N Intercoms and the C•CURE access control system.
The solution has one main data flow component:
Outbound JSON data (driver): The driver monitors 2N intercoms through the use of their JSON REST API.
This allows the driver to retrieve the status of the devices and issue commands.
2N Master Station