Part No. 9159014EU/US/UK
2N 2Wire
®
(set of 2 adaptors and power source for EU/US/UK)
The converter allows you to use existing 2N 2Wire
®
wiring (2 wires) from your original door bell or door
intercom to connect any IP device. You don’t have to
configure anything, and you only need one 2N 2Wire
®
unit at each end of the cable and a power source
connected to at least one of these units.
The unit then provides PoE power not only 2N 2Wire
®
to the second converter, but also to all other
connected IP end devices.
External 125 kHz RFID card reader
Secondary reader for connection to an internal reader.
Allows control of card entry from both sides of the
door. IP67 cover, also suitable for exteriors. Reads
EM4100 and EM4102 cards.
To Next Page
Loading...
