Connect the device via the power jack on the back side as shown in the 2N SIP Mic
®
figure below.
Power Supply Connection
consumption with different power supplies: 2N SIP Mic
®
Power supply Consumption
PoE, IEEE 802.3af 8 W
12 V / 2 A 25 W
Warning
If you use an adapter other than the recommended one, do not exceed
the nominal supply voltage value of 30 V. Also make sure that the
supply voltage polarity is correct. Exceeding nominal values and/or
incorrect connection may lead to irreversible damage of the equipment.
To Next Page
Loading...