VAPIX Destination
Transport protocol – select the type of audio stream transmission: unsecured
HTTP or secured via ssl in HTTPS.
– set the IP address to which RTP packets are sent.Address
– set the destination port via which the device listens.Port
– set the user name for authentication.User name
– set the password for authentication.Password
– set the maximum call duration after which the call shall Maximum call duration
be terminated: 0 to 60 min. The default value is 0 min – the parameter is not
applied, the call duration is unlimited.
– set the audio codec for outgoing RTP packet encoding: G.711a Audio codec
(alaw) or G.711u (ulaw).
To Next Page
Loading...