3.1 Configuration
Configure 2N SIP Mic
®
via a PC equipped with any internet browser:
Launch your internet browser (Internet Explorer, Firefox, etc.).
Enter the IP address (e.g. ).2N
®
SIP Mic http://192.168.1.100/
Enter the username and password to log in.Admin 2n
You have to know the device IP address to log in to the integrated web server. By
default, is set to the dynamic IP address mode: the IP address is acquired 2N
®
SIP Mic
automatically if a properly configured DHCP server is available in the LAN. Where the
DCHP server is unavailable, can work in the static IP address mode. Refer 2N
®
SIP Mic
to the section for configuration details.Configuration 2N
®
SIP Mic
Should the device be still unavailable (forgotten IP address, LAN configuration
change, etc.), find the IP address using a device button.
IP Address Lookup
Do the following to find the IP address:2N
®
SIP Mic
Connect to a power supply (or disconnect and reconnect it if 2N
®
SIP Mic
already supplied).
Wait for the sound signal .
Press the hang-up button on the device five times.
reads its IP address. 2N
®
SIP Mic
If the address is 0.0.0.0, it means that did not get the IP address 2N
®
SIP Mic
from the DHCP server.
To Next Page
Loading...