Common
– this parameter is applied Connect microphone automatically at incoming call
only if automatic call answering is selected (VoIP / Settings / Others menu). If
you answer calls manually, it is not applied.
– set how to handle a call that comes in while Handle second incoming call
another call is active. The default value is Reject.
Reject – the other incoming call is rejected.
Ringing (LED flashing) – the other incoming call is signalled by flashing
LEDs but does not affect the currently made call.
Ringing (LED, speaker tone) – the other incoming call is signalled by
flashing LEDs and ringing tone from the speaker. The ringing tone of the
other call is different from the common ringing tone.
Note
2N SIP M
®
ic is capable of serving up to two calls at the same time. The
third and next incoming calls are rejected.
Status
SIP status – display the current SIP Proxy line status: Inactive, Active, Registered,
Registration in progress and Registration error. Refer to the System Status
subsection for details.
– display the set IP address for NAT if used. 0.0.0.0 is displayed when NAT IP
To Next Page
Loading...