Press keys to visualize Maximum Angle.
Press
to enter in the Modification Section.
A: .x t 0
Max 0
With the
button, take the asterisk on the numerical value and modify it with
the
keys.
To confirm , press .
*
Max 0
Note!
Maximum Angle Position is defined by the machine constructor and it also
depends by the machine type and model.
Memorizing Maximum Angle
Press keys to visualize Memo Max section.
Press
to enter.
A: .x t 0
Memo Max 0
Follow Instruction on display.
Press
button to confirm.
Press
button to turn back.
A: xx.x t xxxx
Esc to confirm
To Next Page
